All Products

Plans for a patio size reverse flow smoker built from 24 in pipe or rolled steel, about 46.5 in long, with a warming cabinet, a square firebox on the right and a cart on casters.In the plans: Cart with casters Warming cabinet with racks...

Plans for a reverse flow smoker built from 30 in diameter pipe, 72 in long, with a square firebox on the right and a large warming cabinet.In the plans: Large warming cabinet with adjustable shelves, the same width and depth as the firebox One...

Plans for a traditional, Texas style offset smoker built from a 500 gallon propane tank, with a round firebox on the right and a scoop baffle.Tanks you need: a 500 gallon propane tank for the cook chamber, about 38 in diameter by 120 in...

Metric plans for an offset smoker built from a 950 liter tank, about the size of a US 250 gallon tank, with a square firebox on the right and a scoop baffle. All dimensions are in millimeters.Fits any tank 760 mm in diameter and...

Plans for a backyard reverse flow smoker built from 24 inch diameter pipe, 48 inches long, with a square firebox on the right.What you get: a PDF plan set drawn in AutoCAD to our BBQ Pit Engineering design standards. Your download shows up right...

Plans for a 24 x 36 Santa Maria grill built from 10 gauge or heavier flat plate.Need a different size? The hardware stays the same; only the steel cuts change. You can even build it square from 1/4 inch plate and make it wider....

Plans for a reverse flow smoker built from a 325 gallon propane tank at least 30 in diameter and 100 in long, with a square firebox on the right and a warming cabinet.Bonus: cold smoking. This set has all of our Platinum Package options...

The SuperPan Gravity Feed smoker plans with double surface mounted doors and 5- 47x25 cooking racks. This is the largest set of Gravity Feed smoker plans we have produced to date! The overall finished dimensions of this smoker not including the off road cart...

Yep, this big ol hybrid offset is Completely Insulated! We had a request to make a set of plans for a rectangle cooking chamber hybrid offset that is double walled and fully insulated. This smoker is ideal for super cold climates and cooking during...

Plans to build your own 3500 lb trailer for a 250 gallon or smaller smoker.Is it the right trailer? It's rated for smokers under 2200 lb with the weight spread evenly on the deck. If your smoker is heavier, or sits off center, go...

Plans for a patio size reverse flow smoker built from 24 in pipe, 48 in long, with a warming cabinet and a square firebox on the right. It also makes a nice trailer rig for competitions.What you get: a PDF plan set drawn in...

Plans for a 150 gallon tank offset smoker with a scoop baffle. A good size if you're starting to cater or cooking for bigger backyard parties.Fits a tank 24 in diameter by 71 in long, measured tip to tip. These tanks run 67 to...

Plans to build your own 6000 lb trailer, 4 ft wide by 12 ft long, for a 500 gallon or similar size smoker. It also works for a smaller smoker if you want room on the deck for grills and other gear.What you get:...

Plans for a single pan vertical pellet smoker, the set-it-and-forget-it smoker you build yourself. Designed around the SmokeDaddy Pellet Pro pellet hopper.What you get: a PDF plan set drawn in AutoCAD to our BBQ Pit Engineering design standards. Your download shows up right after...

This set of Reverse Flow smoker plans is built using a 24" diameter Propane tank with elliptical ends that is 68.5" long. This set includes a warming cabinet.

Plans for a big 500 gallon propane tank reverse flow smoker with a warming cabinet, two cook chamber doors and a square firebox on the left. We designed it for Bill at Big Pappa Bill's BBQ in Washington State, who needed a smoker that...

Plans for a backyard offset smoker built from 24 inch diameter pipe at least 48 inches long, with a square firebox on the right.Steel: 3/16 inch minimum. 1/4 inch is the most popular choice.What you get: a PDF plan set drawn in AutoCAD to...

Plans for a 30 x 48 Santa Maria grill built from 10 gauge or heavier flat plate.Need a different size? The hardware stays the same; only the steel cuts change. You can even build it square from 1/4 inch plate. Email us and we'll...

Plans for a 250 gallon propane tank offset smoker with a round firebox on the right and a throat scoop baffle.Fits a tank 30 in diameter by 87 in long, measured tip to tip. The firebox is cut from the same tank, and the...

Plans for a backyard offset smoker built from 24 inch diameter pipe at least 48 inches long, with a round firebox on the right made from another section of pipe.Steel: 3/16 inch minimum. 1/4 inch is the most popular choice.What you get: a PDF...