SORRY! SOLD OUT!

logo
Your Account
0

SORRY THIS OFFER HAS ENDED. CLICK BELOW TO SHOP MORE OPTIONS...

CLICK HERE TO GO TO HOME PAGE
sample smoker plan with USB thumb drive

Legacy 250 Offset Smoker Plans FREE Just Pay S&H

5.0
If you're wanting to build a 250 Gallon Propane Tank Offset Smoker this set of plans is exactly what you're looking for!
Normally this set of smoker plans sells on this website for $79!
But today you can grab your copy and just pay the S&H of $12!

Not all Offset Smokers are created equal!  
We learned long ago it is a science to make a smoker easy to build and operate.  
Especially if you want consistent results for years to come.  
You've likely tried to do the math and build your own offset smoker and you've no doubt struggled!  We have spent years designing and building smoker, testing and perfecting our design process.
Now we have made it easy for your to build the greatest Offset Smoker on the market!  
Grab this set of plans and build your own SmokerBuilder® LEGACY 250 Offset Smoker! 

These smoker design plans feature:
  • 250 Gallon 30 Inch Diameter ​Round cooking chamber with 2 doors.
  • ​Vertical Scoop Style Baffle
  •  Grease drain with ball valve
  •  Round smoke stack
  •  Square firebox
  •  Side mounted air inlets
  •  Log rack in firebox
  • Door counterweights
  • Smoke stack collector box

Optional Upgrades:

Be sure to check the options below to get the CNC Plasma Table File, Trailer Plan, and more!

Avoid Costly Design Mistakes!

Build your smoker with confidence! We've already done all the math and mechanical design to ensure your smoker runs exactly how you would expect it to!

Free Smoker Plan
Man is working

No Need To Worry About Where To Make That First Cut...

These Plans Are Fully Detailed And Fully Dimensioned, Showing You Exactly What To Do!


Everything is laid out in an easy to understand method, showing you everything from how to mark out your door cuts on the cooking chamber and all the other details you would be concerned about..

Hundreds Of Pitmasters Have Used These Plans To Build Their Dream Smoker!

We've shipped hundreds of copies of these plans worldwide to Pitmasters in countries everywhere!

Frank's Promise...

"Inside this set of smoker plans is the key to the best patio size reverse flow smoker you've ever owned. I want you to have a great time building your new smoker and the memories you'll have for years to come! My team and I are here to support you all the way! No matter what you run into during your build we are just a phone call, email, or chat away! Your Smoker Build will be easier and faster than you ever dreamed!"

Frank Cox
smoker project

We Took Care Of The Math And Design, But You Can Customize And Make It Yours!

We took all the worry out of your smoker project by doing all the math and design for you! This way you can build your smoker to function reliably the first time. Using this set of smoker plans you'll be able to spend your time doing all the fun stuff like customizing your smoker and making look uniquely yours!

Testimonials

Chuck

Chuck, Iron Oak BBQ Pits

⭐️⭐️⭐️⭐️⭐️

Time Saver!

As a BBQ pit builder I often get requests to build smokers that I've never built. Rather than searching the web and trying to decipher someone else's build, I reach out to Frank Cox here at Smokerplans.net for plans. He's a great guy and I'm not too proud to ask for his help. He's spent countless hours of research and development on all of his smokers plans. That means the drawings represent smokers that have been built and tested. To me, that's invaluable! Best of all, I can still make the build my own. So when a customer asked me to build a smoker, I knew Frank would have a plan in his catalog. With this plan, I can use my custom hinges, handles, thermometers, casters, and logo, etc. But, if you don't have those personal touches, he has those too! This plan is full of detail! That allows me more time in the shop, getting this build done, and less time at the "drawing board". So, whether you are a seasoned pit builder or a do-it-yourselfer building a personal pit, get in touch with Frank and save yourself tons of time!


John Beatty

John Beatty, DIY Builder

⭐️⭐️⭐️⭐️⭐️

1ST build


I ordered the 250 gallon plans, bullet hinges for my firebox, Thermometers, bunges, and the weld on hinges for my doors. Very satisfied with all the products.

I have to say, they are far behind the value of the information I got from watching Mr. Frank on his youtube channel.

Both video's of the door measuring, and cut out were superior!

I don't have any training as a welder, or fabricator.

After watching the video's, I had to give it a try.

My welding gives name to the dirt dobber title, but the smoker cooks like a champ! Thanks to all,

John Beatty.


Foundation Package Files

For a Limited Time Only

Hurry, For the next hour you can add the Foundation Package Files for only $39 more! Normally these files sell on our website for an additional $50 each!

So instead of spending $100 more to get the CNC Plasma Table file and the 3500 Pound Trailer Plan, you'll only spend $39!

Be sure to click the drop down menu on the Add To Cart when you click the button below!

Why Upgrade To The Foundation Package?

The most time consuming part of your build is taking the time to layout and cut all the flat steel parts for your build. You'll need to cut straight, square, and precise on each cut. If things aren't square and clean then welding your cooker will be a huge challenge! The CNC Plasma Table File will allow you to have your steel parts cut by your steel supplier with accuracy saving you tons of frustration! But that's not all...

With the Foundation Package you'll not only get the CNC Plasma Table Files but you'll also get the 3500 Pound Trailer Plans!

You'll be able to confidently build a trailer for your smoker making it mobile! The trailer plan shows you exactly how to build the frame, tongue, and where to hang the axle!

The plan also includes a wiring diagram! So hurry and grab your copy of the smoker plans and the foundation copy!

Foundation Package
Silinder
x